2100MHz WCDMA 3G Repeater Mobile Signal Booster
The booster kit includes an booster, an indoor antenna and an outdoor antenna, the outdoor antenna can pick up good mobile signal from outside of your house, and send the signal through coaxial cable to the booster, the booster can amplify the signal, then the amplified signal is sent to the indoor antenna, the indoor antenna can transmit the signal into your house, so you can enjoy clearer phone call or faster mobile date inside your house.
We provides signal boosters kits for any Homes, Offices, Cars, RV's, Boats and more. All amplifier kits come with Indoor and Outdoor Antennas, Cables, Power adapters and more.
HPC-W-27 WCDMA 3G 21mhz repeater Features:
1.With unique appearance design, have good cooling function
2.With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;
3.With DL signal LED display, help to install the outdoor antenna at the best state;
4.With AGC and ALC, make repeater work stable .
5.PCB with isolation function ,make UL and DL signal not influence each other,
6.Low intermodulation, high Gain ,stable Output power
HPC-W-27 2100mhz repeater Inside and Outside Design
Specification of HPC-W-27 Dual band repeater:
Electrical specification |
Uplink |
Downlink |
||
Frequency Range |
WCDMA 2100 |
1920 ~ 1980 MHz |
2110 ~ 2170 MHz |
|
Max .Gain |
≥ 75dB |
≥ 78dB |
||
Max .Output Power |
≥ 24dBm |
≥ 27dBm |
||
MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
|||
Automatic Level Control |
≥ 20dB |
|||
Gain Flatness |
GSM & CDMA |
Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) |
||
WCDMA |
≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) |
|||
Noise Figure |
≤ 5dB |
|||
VSWR |
≤ 2.0 |
|||
Group Delay |
≤ 1.5μs |
|||
Frequency stability |
≤ 0.01ppm |
|||
Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 V 6.1.0 |
|||
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||||
CDMA Meet IS95 & CDMA2000 | ||||
WCDMA System |
Spurious Emission Mask |
Meet 3GPP TS 25.143 ( V 6.2.0 ) |
||
Modulation Accuracy |
≤ 12.5% |
|||
Peak Code Domain Error |
≤ -35dB@Spreading Factor 256 |
|||
CDMA System |
Rho |
ρ > 0.980 |
||
ACPR |
Meet IS95 & CDMA2000 |
|||
Mechanical Specifications |
Standard |
|||
I /O Port |
N-Female |
|||
Impedance |
50 ohm |
|||
Operating Temperature |
-25oC~+55oC |
|||
Environment Conditions |
IP40 |
|||
Dimensions |
155x112x85mm |
|||
Weight |
≤ 1.50Kg |
|||
Power Supply |
Input AC90-264V,output DC 5V / 3A |
|||
LED Alarm |
Standard |
|||
Power LED |
Power Indicator |
|||
UL LED |
Be lighted when there is phone calling |
|||
DL 1 |
Be lighted when Outdoor signal is -65dB |
|||
DL 2 |
Be lighted when Outdoor signal only -55dB |
|||
DL 3 |
Be lighted when Outdoor signal only -50dB |
Installation Steps:
1. Mount the Outdoor Antenna. Choose a location for the Outdoor Antenna using your cell phone to determine the area of strongest signal.
2. Place the Phonetone Base Unit where you want to create a Cell Zone. For the widest possible signal area, position the Base Unit near the middle of a room.
3. Connect the Indoor Antenna to the Base Unit and place it where you need signal.
4. Run the provided coaxial cable between the Base Unit and Outdoor Antenna.
5. Connect the Phonetone Base Unit to the provided power supply and plug into a power outlet.
Package:
1. 1 * Booster
2. 1 * Power Adapter
3. 1 * Mounting Screw Kit
4. 1 * English User Manual
5. 1 * Indoor Antenna
6. 1 * Outdoor Antenna with 10m (about 32.8ft) Cable
Professional manufacture following products:
1) Repeater of CDMA / GSM / DCS / WCDMA / IDEN / TETRA / CDMA 450MHz / PCS / LTE
2) Pico Repeater (Booster) of CDMA / GSM / DCS / WCDMA / PCS / CDMA 450MHz
3) Dual Band Repeater of GSM+DCS or GSM+WCDMA
4) Tri-band Repeater of GSM+DCS+WCDMA
Output power is related with th