Outdoor Repeater PCS1900mhz Network Output 10watts
ST Signal Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low-power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Main Features of ST Signal Repeater
High linearity PA; High system gain;
Intelligent ALC technology;
Full duplex and high isolation from uplink to downlink;
Automatic Operation convenient operation;
Integrated technique with reliable performance;
Local and remote monitoring (optional) with automatic fault alarm &remote control;
Weatherproof design for all-weather installation;
Applications of ST ST Signal Repeater
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than-70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
Specification of 10watts PCS 1900mhz Signal Repeater
Frequency |
TX: 1850 ~ 1910 MHz |
RX: 1930 ~ 1990 MHz | |
Output power |
TX: 39dBm±2dBm |
RX: 40dBm±2dBm | |
ALC control |
When in max output power, if increased less10dB input Level, the variation of the output power can be controlled within 2dB , When in max output power, if increased over10dB input Level, the variation of the output power can be controlled within 2dB or shut down repeater |
Gain |
85±2dB |
Gain control range |
≥30dB |
Gain control step and error |
Gain control step:1dB Error range:0~10dB, error ≤±1dB; 10~20dB ,error≤±1dB; ≥20dB, error≤±1.5dB |
Ripple in band |
≤2.0dB/3.84MHz(peak value),Ripple in band≤4.0dB |
Frequency error |
≤±0.01ppm |
Spectral emission |
Meet 3GPP TS 25.106 demand |
ACRR |
Meet 3GPP TS 25.106 demand |
Spurious emission |
Meet 3GPP TS 25.106 demand |
Output intermodulation |
Meet 3GPP TS 25.106 demand |
Vector range error |
EVM≤12.5% |
PCDE |
≤-35dB |
Noise figure |
≤6.0dB |
Insulation test and prevent self-excitation |
Support |
Time delay |
≤5.0us |
VSWR |
≤2.2 |
Ripple out of band |
2.7MHz≤f_offset≤3.5MHz≤70dB |
3.5MHz≤f_offset≤7.5MHz≤70dB | |
7.5MHz≤f_offset≤12.5MHz≤45dB | |
12.5MHz≤f_offset≤35dB |
Repeater application
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots, hospital etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.