1. Split PVC, PU Belt up to 1-10mm.

2. High precision separation and easy work with scale; can separate films accurate to 0.05mm.

3. With Scale to adjust the splitting depth max. 130mm

4. Hard alloy steel knife and one complete aluminum body, more durable and sharper.

5. Work more safe with cover.

6. Easy control start/stop with pedal switch.

7. Positive/Inversion control box.

8. No Belt Width limited, belts can be divided into two layers, three layers etc.

9. Can splite side of the belt for side seam preparation -new function.

 

 

Bayrich Ply separator has been tested successfully with different belt type. However, this is no guarantee for good results. Fabricating belts does require the operator to master skills and have a certain lever of craftsmanship. Results also depend on good practice, material composition and sharpness of the blade.

 

 

The conveyor belt layerer includes the main body of the layerer, in which there are two transmission rollers, both of which are equipped with eccentric adjustment shafts, which are divided into upper adjustment shaft and lower adjustment shaft.

One side of the ply separator main body is equipped with upper support cover and lower support cover, and the other side is equipped with adjusting cylinder and adjusting arm.

The cylinder body of the adjusting cylinder is hinged on the main body of the separator machine, and the output rod of the adjusting cylinder is hinged with a connecting block, One end of the up-regulating shaft is fixed with the connecting block, and the other end is hinged on the upper support cover.

The up-regulating shaft is driven to rotate by controlling the telescopic output rod. The lower support cover is equipped with a shaft end lifting adjustment device. One end of the down-regulating shaft is set on the shaft end lifting adjustment device, and the other end is fixedly connected with the adjusting arm.

The down-regulating shaft is driven to rotate by controlling the rotation of the adjusting arm, The parallelism of the down-regulating shaft and the layering blade is controlled by the shaft end lifting adjustment device. The above layering machine is easy to operate, high in processing efficiency, high in accuracy and good in layering effect.

 

 

 

 

http://www.baybelting.com/